Sealcoating in Amarillo
Pavement maintenance, not striping — listed here because every sealcoat job ends with a full restripe.
Sealcoating is a protective coating sprayed or squeegeed over asphalt. It slows sun and water damage and turns a gray, oxidized lot black again. Most Amarillo paving and striping companies bundle it with striping, for one practical reason:
Sealcoat covers every line on the lot. When it dries, the stalls, symbols, arrows, and fire lanes are all under it. The lot then gets a full restripe — priced as a new layout if the old lines can't be traced, or a restripe where they still show through faintly during layout.
The order of work
- Clean and prep. The surface is cleaned and cracks are filled.
- Sealcoat. One or two coats over the whole lot.
- Cure. 24 to 48 hours before traffic or paint.
- Restripe. Full layout of stalls, ADA spaces, fire lanes, and markings.
Sealcoating prices
How the prices on this page work: no Amarillo striping company publishes prices, so the ranges below come from published Texas striping rates and national cost guides, checked November 2026. They are ballparks for planning. The written estimate is the price for your job.
| Job | Published range |
|---|---|
| Restripe an existing lot | $4–$8 per stall |
| Small lot restripe (20–40 stalls) | $450–$1,200 |
| Medium lot restripe (40–100 stalls) | $1,500–$3,500 |
| Sealcoating | $0.15–$0.40 per square foot |
The written estimate is the price for your job.
Planning a sealcoat?
Get the sealcoat and the restripe priced together, so the lot reopens finished.
Questions
Does sealcoating cover the old lines?
Yes, completely. Sealcoat is a black coating over the whole surface, so every line, symbol, and stencil under it is gone when it dries. Budget for a full restripe with any sealcoat job.
How long after sealcoating can the lot be striped?
24 to 48 hours in normal Panhandle weather — the sealcoat has to cure before paint goes on it. Striping is usually scheduled as the last step of the sealcoat job.
How long does sealcoat last?
Two to three years is typical for a commercial lot in Texas sun. It slows the asphalt's aging and keeps water out of small cracks. It does not fix failed asphalt — soft spots and big cracks are paving repairs, not sealcoat.
What does sealcoating cost?
Published rates run $0.15–$0.40 per square foot. A 25,000 square foot lot, sealcoated and restriped, typically runs $4,000–$9,000 all in.
Is sealcoating worth it on an old lot?
On sound asphalt, yes — it's the cheapest way to extend the surface. On asphalt that's crumbling or holding water, the honest answer is to repair or repave first. The estimate will say which one your lot needs.
One job, start to finish
Sealcoat, cure, restripe — scheduled as a single project.